According to early weather forecast projections, Buffalo and Western New York may not be getting a bad winter season as far as snow and other conditions. These long-range projections, along with research on the effects of El Niño, paint a better picture for people to know what to expect and how to prepare.
That being said, preparation is still advised just in case things do get bad. For us at Bradley Tree, the removal of snow and ice in and around your property will really affect how you preserve your surrounding plant life, including trees and other shrubs.
We want to avoid any damage that could be brought upon your trees and still emphasize what our mission is for 2026 and going into 2027: to preserve trees and the health of your property’s environment. In this blog, we will explain to you what the improper forms of snow and ice removal are, how they damage your trees, and how to safely remove ice and snow.
Avoid Piling Up Snow Around Trees
Whenever we drive around this region, we see countless piles of snow layered around trees. We get that it’s tempting to put that snow in the nearest open space where you might think it’s not a hassle for anything, but when it comes to doing it around plant life, it’s ill-advised. If that pile of snow contains road salt, de-icing chemicals, or other debris, it’s a recipe for disaster.
When that pile of snow begins to melt around the tree, it will melt into the soil and infect the tree’s roots. Salt interferes with the ability to absorb water properly, so this will cause drought stress, even if the soil is still wet. If the snow pile is heavy instead of soft, it will bury the trees’ lower branches and compact the soil.
A good way to avoid this is by keeping snow that could be plowed clear of the trunks and avoiding directing the meltwater toward landscaped areas. A younger tree will suffer much more from these bad side effects because the root system is still growing and hasn’t fully developed yet.
The Negative Effects of Ice-Melting Products
Let’s elaborate more on why ice-melting products are so bad for trees. One of the most widely used forms of an ice-melting agent is rock salt (sodium chloride). It’s effective and inexpensive to use, yet it can be the most harmful. The salt is carried through runoff, contaminated snow, or if a car passes by and kicks up spray.
One particular tree type that can get the worst of this is evergreens. Any form of an evergreen, like pine trees, fir trees, hemlock trees, spruce trees, or redwood trees, has its signature needles that are vulnerable to salt. If by chance your needles are affected by it, rinse them with plain water when the temperature is safely above freezing.
If you use any ice-melting agent, do so sparingly and follow everything noted on the product label. Be sure to shovel the snow first, and then only apply enough salt to loosen the remaining ice underneath. Another option is to use sand for good traction. Other alternatives can be used, such as calcium- or potassium-based products that could be less damaging, but nothing is completely risk-free.
Read here on the Iowa State University Extension page about damage from deicing salts to learn more!
How to Safely Remove Snow on Your Trees Without Harm
Even if you don’t pile up snow around your trees when shoveling, snowfall, in its own way, will accumulate on the branches and the canopy, and there are safe ways to handle this that some people might not adhere to. Firstly, DON’T ever hit your trees with a broom, shovel, or rake to knock them off. Also, DON’T shake the tree or pull on an ice-covered branch because it will cause breakage.
In some cases, we might actually recommend that you don’t touch the tree at all if you think the weight of the snow or ice is too much to handle. Sometimes it is just best to let the process melt on its own without interference.
Bringing it back around to evergreen trees, arborvitae, and junipers in particular, wet snow is not good for them because their branches can break under the weight of how heavy wet snow can be. In order to remove it, just gently brush it away with an upward motion, starting near the bottom. We don’t recommend you use a ladder for any of this, and if the tree is much larger, just leave it alone and wait.
When the spring season comes back around, make sure you check for any form of branch dieback, broken limbs, or brown foliage. Once the ground starts thawing out, watering your plants and trees could flush all the salt away from the soil.
If any trees have suffered hazardous damage, contact us immediately, and we will send an ISA-certified arborist over for an assessment. Again, we can’t recommend enough that you follow these tips for winter tree care. If you have any other questions, give us a call or reach out through our contact form, and we will get back to you as soon as we can!
Winter Tree Care FAQ
Is rock salt harmful to trees and shrubs?
Yes, rock salt has the potential to harm your trees because it contains sodium chloride, which will damage tree roots from absorbing water, and it harms the foliage. Evergreen trees, especially including pine trees, spruce trees, fir trees, or hemlock trees, as examples, are very vulnerable to salt spray.